What Is The Optimal Water Pressure For Taking Showers

Last Updated on November 27, 2019 by Terry Ohara

I take it each and every one of us wants to take quality showers, and that’s a problem sometimes for some locations that have low-pressure. If you enjoy low-pressure and that’s how you want your showers to be, that’s okay, but if you feel like a high-pressure showerhead can satisfy and make you enjoy your showers more, then all you need is to check out the best high-pressure showerheads on the market, and you’ll see that they really make a difference.

However, just because you think a high-pressure showerhead is better doesn’t mean that everyone should have that opinion, some people find it adequate to shower with low-pressure showerheads, while some other people like high-power firehose.

To reach a settlement, you need to determine your home’s water pressure, and the best way to do that is having a periodic water pressure reading.

Although if you don’t want to get through all that trouble, I’m going to make it simple for you. A water pressure reading will tell you how strong your water is in pounds per square inch or shortly PSI. Thus, from what I’ve gathered and from my experience, the normal water pressure is between 40 and 60 PSI, and for the most part, the majority of people prefer 50PSI, which is in-between both numbers, so if you happen to read your home’s water pressure, you can adjust it at this specific PSI which would be ideal for all family members.

Also, that’s not the only reason why you should read your water pressure, because if your water pressure is too high, then you’re using too much water, while if it is too low, you’re cleaning and bathing tasks are going too slow, so getting it right, you’ll need to determine the water pressure of your home for sure.

Other than that, to reach that desirable PSI, you can call a plumber to check out your piping system, because as it happens in some places the water pressure is too low, but most of the time it is because of the piping system, so if a high-pressure showerhead doesn’t do the job, then a plumber will.

Before we end, I also feel like I should mention how you can change your water pressure, starting with the valve which is made of brass with a bell-shaped middle section and followed by a screw at the end of the bell. Manipulating with that screw will adjust the water pressure, although to increase it you’ll need to tighten the screw down by turning it clockwise, and to decrease it vice-versa, you need to turn the screw counter-clockwise, pretty easy right?

All and all, I hope this article was helpful to you, and if you have any questions regarding this topic, make sure you contact me and I’ll get back to you as soon as I can.

Leave a Comment